![background image](http://html2.mh-extra.com/html/icom/ic-m1v/ic-m1v_service-manual_4298601015.webp)
5 - 4
*The output level of the standard signal generator (SSG) is indicated as the SSG’s open circuit.
1
1
2
• Operating channel : ch 16
• Connect a standard signal generator to
the antenna connector and set as:
Frequency
: 156.800 MHz
Level
: 3.2 µV* (–97 dBm)
[IC-M1V]
: 4.5 µV* (–94 dBm)
[IC-M1EURO V]
Modulation
: 1 kHz
Deviation
: ±3.5 kHz
• Receiving
• Operating channel : ch 16
• No RF signals are applied to the anten-
na connector.
• Receiving
• Set the cursol to “SQL” on the adjust-
ment program and push [ENTER] key,
then push [ENTER] key again.
• Operating channel : ch 16
• Connect a standard signal generator to
the antenna connector and set as :
Level
: 0.71 µV* (–110 dBm)
[IC-M1V]
: 1 µV* (–107 dBm)
[IC-M1EURO V]
Modulation
: 1 kHz
Deviation
: ±3.5 kHz
• Receiving
• Push [ENTER] key on the keyboard.
RX
SENSITIVITY
SQUELCH
LEVEL
Maxmun level on the computer display (T1–T4) respectively.
ADJUSTMENT
ADJUSTMENT CONDITION
VALUE
5-3 RECEIVER ADJUSTMENT
Select an operation using [
↑
] / [
↓
] keys, then set specified value using [
←
] / [
→
] keys on the connected computer keyboard.
CONVENIENT:
The BPF T1–BPF T4 can be adjusted automatically.
q
-1: Set the cursol to “BPF ALL” on the adjustment program and then push [ENTER]
key.
q
-2: The connected PC tunes BPF T1–BPF T4 to peak levels.
or
w
-1: Set the cursol to one of BPF T1, T2, T3, or T4 as desired.
w
-2: Push [ENTER] key to start tuning.
w
-3: Repeat
w
-1 and
w
-2 to perform additional BPF tuning.
NOTE:
Squelch level adjustment is adjusted automatically by
the adjustment program.