![background image](http://html1.mh-extra.com/html/icom/ic-gm800/ic-gm800_instruction-manual_3491146066.webp)
61
2001 NEW
2001 NEW
DSC OPERATION
7
■
Receiving DSC calls
D
Receiving an Individual call
NOTE:
When the “Individual ACK” item is set
to Auto, the transceiver automatically sends an
acknowledgement. In that case, both the TX and
RX calls are stored in the Transmitted and Received
Call Logs. (p. 69)
NOTE:
To receive an Individual call, push [D-SCAN]
to enter the DSC watch mode.
1. When an Individual call is received:
•
Alarm sounds.
•
The following screen is displayed and the backlight
blinks.
•
“
” is displayed and “
” blinks.
Push [Alarm Off]
.
2. Select your desired action.
L
To send an acknowledgement, push [Accept]
.
[Hold]:
Push [Hold]
to return to the Main
screen.
[ACK (Able)]: Push [ACK (Able)]
to send an
acknowledgment without any changes.
[Accept]:
Push [Accept]
to enter the DSC
Task mode.
L
Rotate [CH/ENT] to confirm the call contents.
L
See page 29 for details of the Software key
functions in the DSC Task mode.
NOTE:
When you select “Accept” in step 2, you
can send the acknowledgement in the DSC Task
mode. To send the acknowledgement, go to step 3.
If you return to the Main screen without sending
the acknowledgement, go to step 7.
3. Push [
≈
] to scroll the software key function.
4. Push a desired key to select an
acknowledgement option.
5. Push [Call]
to send the Individual
acknowledgement.
6. Hold down [PTT] to communicate.
7. Push [Standby Mode]
to return to the
Standby mode.
TIP:
When you send the acknowledgement, select
one of 3 options, depending on your situation.
See page 45 for details of the Individual
acknowledgement procedure.
D
Receiving an Individual acknfwledgerent
After sending an Individual call, while the screen
shown below is displayed, you can receive an
Individual acknowledgement.
Push
any