![background image](http://html1.mh-extra.com/html/icom/ic-gm800/ic-gm800_instruction-manual_3491146050.webp)
45
2001 NEW
2001 NEW
DSC OPERATION
7
D
Sending an Individual acknowledgement
When receiving an Individual call, you can send an
acknowledgement (‘Able,’ ‘Unable,’ or ‘New CH’) by
using the on-screen prompts.
1. When an Individual call is received:
•
Alarm sounds.
•
The following screen is displayed.
Push any [Alarm Off]
.
2. Push [Accept]
.
•
Enters the DSC Task mode.
•
“
✔
” is displayed on the Task tab.
3. Push [
≈
] to scroll the software key function.
4. Push a key to select an acknowledgement option.
(Example: ACK (Able))
Information
ACK (Able):
Send an acknowledgment without any changes.
ACK (Unable):
Send an acknowledgment, but you cannot make a
communication.
ACK (New CH):
Send an acknowledgment. You can specify the Voice
Communication channel.
•
The call contents screen is displayed.
5. Rotate [CH/GRP] to confirm the contents.
6. Push [Call]
to send the Individual
acknowledgement.
7. Hold down [PTT] to communicate.
8. Push [Exit]
to return to the Main screen.
D
Sending a Group call
You can transmit a DSC signal to only a specifi c
group.
1. Push [Compose Non-Distress]
.
To display the screen from the Menu screen:
([MENU] >
Compose Non-Distress
)
2. Select “Message Type.”
3. Select “Group.”
4. Select “Address.”
Push
Push
Push
Push
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
■
Sending a Non-Distress calls