![background image](http://html2.mh-extra.com/html/icom/ic-fr3000-series/ic-fr3000-series_instruction-manual_3509612017.webp)
4
12
OPERATION
■
Turning power ON
q
Push [POWER] to turn power ON.
w
If the repeater is programmed for a power on pass-
word by an Icom Dealer, input digit codes directly.
• The keys in the table below can be used for password
input.
• The repeater detects numbers in the same block as
identical. Therefore “01234” and “56789” are the same.
e
When the “PASSWORD” indication does not clear
after inputting 4 digits, the input code number may
be incorrect. Turn power off and start over in this
case.
■
Receiving and transmitting
D
Receiving
q
Push
[
POWER
]
to turn power ON.
w
Set the audio and squelch levels.
➥
Rotate [SQUELCH] fully counterclockwise in ad-
vance.
➥
Rotate [VOLUME] to adjust the audio output level.
➥
Rotate [SQUELCH] clockwise until the noise dis-
appears.
e
Push [UP] or [DN] to select the desired channel.
• When receiving a signal, BUSY indicator turns ON and
audio is emitted from the speaker.
• Further adjustment of [VOLUME]
to a comfortable listen-
ing level
may be necessary at this point.
D
Transmitting
q
Take the microphone off hook.
w
Wait for the channel to become clear.
e
Push and hold [PTT] to transmit, then speak into the
microphone at your normal voice level.
r
Release [PTT] to receive.
IMPORTANT:
To maximize the readability of the transmitted signal:
(1) Pause briefly after pushing [PTT].
(2) Hold the microphone 1 to 2 inch (2.5 to 5 cm) from
your mouth, then speak into the microphone at a
normal voice level.
KEY
[DN]
[UP]
[MONI] [RPT/BASE] [REMOTE]
NUMBER
0
1
2
3
4
5
6
7
8
9
Summary of Contents for IC-FR3000 Series
Page 1: ...INSTRUCTION MANUAL VHF FM REPEATER iFR3000 UHF FM REPEATER iFR4000...
Page 22: ...17 MEMO...
Page 23: ...18 MEMO...