Icom IC-FR3000 Series, Instruction Manual

Page: 7 / 24

2
1
PANEL DESCRIPTION
!6
ANI CLEAR SWITCH [ANI CLR]
Push for 1 sec. to clear the received ANI ID indica-
tion on the display and returns to original indication.
NOTE: This switch is no function available for some
versions.
!7
DEALER-PROGRAMMABLE SWITCH [PROG]
Toggles the pre-programmed function ON or OFF
when pushed.
!8
PROGRAMMED FUNCTION INDICATOR
Lights green while pre-programmed function is acti-
vated.
!9
DC INDICATOR
Lights green when in DC operation.
D D
Function display
q
MEMORY CHANNEL INDICATOR
Shows the selected memory channel.
w
TRANSMIT POWER INDICATOR
Shows the output power level.
e
AUDIBLE INDICATOR
“@” appears in an audible condition, disappears in
an inaudible condition. (When an audible condition,
audio mute is cancelled.)
r
ALPHANUMERIC INDICATORS
Shows the variety text or code information.
32 H H@ H ICOM H INC.
q w e r
■
Rear panel
q
TRANSMIT ANTENNA CONNECTOR [TX/TX•RX]
➥
Connects a transmit antenna (impedance: 50
Ω
)
and outputs transmit signals.
➥
When installing an optional internal duplexer
(supplied by third party), this connects the trans-
mit receive to an antenna.
w
EXTERNAL SPEAKER CONNECTOR [EXT SP]
Accepts a 4
Ω
external speaker.
e
REMOTE CONNECTOR [REMOTE]
Connects to the remote controller.
• See p. 3 for remote connector information.
r
ACCESSORY CONNECTOR [ACC]
Connects to the remote controller.
• See pgs. 3, 4 for accessory connector information.
t
RECEIVE ANTENNA CONNECTOR [RX]
➥
Connects a receive antenna (impedance: 50
Ω
)
and inputs receiving signals.
➥
When installing an internal duplexer (supplied by
third party), do not use this connector.
y
AC POWER SOCKET [AC]
Connects the supplied AC power cable to a domes-
tic AC outlet.
u
GROUND TERMINAL [GND]
Ground the repeater through this terminal to prevent
electric shocks, TVI, BCI and other problems.
i
DC POWER INPUT TERMINALS [BATTERY]
Connects the 12 V storage battery for the repeater
backup when the AC power is interrupted. These
terminals are also used for DC power operation.
CAUTION: NEVER short the (+) line of the DC
power cable to repeater’s chassis, when connecting
DC power cable to the [BATTERY] terminals. Oth-
erwise, there is danger of electric shock and/or
equipment damage.
TX/TX•RX
EXT SP REMOTE
ACC
RX
GND
AC
BATTERY
q e r t y u
i
w