![background image](http://html.mh-extra.com/html/icom/ic-f9511ht/ic-f9511ht_instruction-manual_612684020.webp)
15
3
CONNECTION AND MAINTENANCE
D
Main unit
q
Unscrew the 4 screws of the front plate (either the left or
right), then remove the front plate from the main unit.
Main unit
Unscrew the cir-
cuit board screw.
Front plate
w
Connect the opposite side of the separation cable that is
connected to the controller described on the previous page
as shown below.
• The cable can be inserted into either the left or right grooves as
desired.
Main unit
Separation
cable
Front plate
Cable grooves
Screw the removed
circuit board screw
in step
q
to connect
the cable terminal.
e
After the cable connection, replace the removed front plate
and the 4 screws, then connect the DC power cable.
Summary of Contents for IC-F9511HT
Page 29: ...MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ...
Page 30: ...MEMO ...