![background image](http://html.mh-extra.com/html/icom/ic-f7000/ic-f7000_service-manual-addendum_612657015.webp)
1 - 1
SECTION 1
SPECIFICATIONS
• IC-F7000
M
General
• Frequency coverage :
(Unit: MHz)
Receive
0.5–29.9999
Transmit
1.6–5.4999
5.73–5.9999
6.7–8.0999
10.0–11.1999
13.4–14.9999
18.0–18.9999
20.0–20.9999
23.0–27.9999
• Type of emission
: J3E (USB/LSB), J2B (AFSK),
(depends on version)
F1B (FSK), A1A (CW),
A3E (AM)
• No. of memory Ch.
: 500 channels (max.)
• Usable temp. range : –10°C to +60°C
• Frequency stability
: ±50 Hz
• Power supply
: 13.8 V DC
(negative ground)
(10.8–15.6 V DC)
• Current drain
:
Transmit (typical)
at max. power 23 A [AUS]
28 A [OTH]
Receive
at max. audio
3.0 A
• Dimensions (projections not incl.):
Main unit
240(W)
×
72(H)
×
239(D) mm
Controller (RC-26)
150(W)
×
50(H)
×
51(D) mm
Speaker (SP-25)
106(W)
×
62(H)
×
46(D) mm
Microphone (HM-155) 65(W)
×
105(H)
×
35(D) mm
• Weight (approx.)
:
Main unit
4.6 kg
Controller (RC-26)
220 g without cable
Speaker (SP-25)
370 g
Microphone (HM-155) 234 g
• Accessary connector : 8-pin DIN connector
• Controller connector : 8-pin MINI DIN connector
• REMOTE connector : D-sub 9-pin
(RS-232C/NMEA)
Transceiver
• Output power
:
1.6–27.9999 MHz
100/50/10 W p-p [AUS]
1.6–3.9999 MHz
125/50/10 W p-p [OTH]
4.0–27.9999 MHz
100/50/10 W p-p [OTH]
• Spurious emission
: Less than –43 dB
below peak output power
(Less than –40 dB for 3.5–
3.9999 MHz range [OTH])
• Carrier suppression : More than 40 dB
below peak output power
• Unwanted sideband : More than 50 dB
suppression
below peak output power
• Mic. connector
: 8-pin modular jack
(2.4 k
Ω
)
Receiver
• Sensitivity:
J3E, A1A
(0.5–1.5999 MHz)
28 dBµV emf
(20 dB SINAD)
14 dBµV
(10 dB S/N)
(1.8–29.9999 MHz) 0 dBµV emf
(20 dB SINAD)
–14 dBµV
(10 dB S/N)
A3E
(0.5–1.5999 MHz)
46 dBµV emf
(20 dB SINAD)
32 dBµV
(10 dB S/N)
• Spurious response rejection ratio:
(1.6–29.9999 MHz) More than 70 dB
• AF output power:
(at 13.8 V DC)
Main unit
More than 4.0 W at 10%
distortion with a 4
Ω
load
Controller (RC-26)
More than 2.0 W at 10%
distortion with a 4
Ω
load
• CLARITY variable range: ±150 Hz
• SP connectors:
Main unit
2-conductor
3.5 (d) mm (
1
/
8
″
)/4
Ω
Controller (RC-26)
2-conductor
3.5 (d) mm (
1
/
8
″
)/4
Ω
All stated speci
fi
cations are typical and subject to change without notice or obligation.
M
M