Icom IC-F6121D, Instruction Manual, Page: 7 / 24

3
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16 ■
.rogrammable function keys
The following functions can be assigned to [U.] , [DOWN] ,
[.0]
,
[.1]
,
[.2]
and
[.3]
programmable function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function depends on the programming.
CH UP AND DOWN KEYS
➥
Push to select an operating channel.
➥
Push to select a transmit code channel after pushing [TX
Code CH Select]
.
➥
Push to select a DTMF channel after pushing [DTMF Au-
todial]
.
➥
Push to select a scan group after holding down [Scan
Start/Stop]
for 1 sec.
ZONE KEY
Push this key, then select the desired zone using [CH Up] /
[CH Down]
.
What is “zone”?
— Selected channels are assigned to a
zone according to how they are to be used in a group. For
example, ‘Staff A’ and ‘Staff B’ are assigned into a “Busi-
ness” zone, and ‘John’ and ‘Cindy’ are assigned into a
“Private” zone.
SCAN KEY
➥
Push to start and cancel scanning operation.
• When Power ON Scan function is activated, push to pause
the scanning operation. And the paused scan restarts after the
specified time period has passed.
➥
Hold down this key for 1 sec. to indicate the scan list, then
push
[CH Up] or [CH Down] to select the desired list.
SCAN ADD/DEL (TAG) KEY
➥
Push to add/delete the selected channel to/from the scan
list.
1. Push to indicate the scan group, then push
[CH Up]
or
[CH Down]
to select the desired list.
2. Push to add or delete the channel to/from the selected scan
list.
3. Hold down for 1 sec. to exit the scan list selection mode.
➥
Push this key while scan is paused (a signal is detected)
on a channel (except for priority channel), the channel is
cleared from the scan list.
Depending on the setting, the cleared channel is added
to the scan list again after the scan is cancelled.