![background image](http://html1.mh-extra.com/html/icom/ic-f6121d/ic-f6121d_instruction-manual_4285863014.webp)
10
2
BASIC OPERATION
D
TX code number edit
(PMR operation only)
If the transceiver has
[TX Code CH Select]
or
[TX Code
Enter]
assigned to it, TX code contents can be edited within
the allowable digits.
USING [TX CODE CH SELECT] KEY:
q
Push
[TX Code CH Select]
to enter the TX code channel
selection mode.
• Select the desired operating channel before entering the TX
code channel selection mode if necessary.
w
Push
[TX Code CH Select]
for 1 sec. to enter the TX code
edit mode.
• The digit to be edited blinks.
e
Push
[TX Code CH Select]
to select the desired digit to
be edited.
r
Push
[CH Up]
or
[CH Down]
to select the desired digit.
t
Push [TX Code CH Select] to set. The digit to the right will
blink automatically.
y
Repeat
r
and
t
to edit all allowable digits.
u
After editing, push
[TX Code CH Select]
to set.
• Return to the stand-by mode.
i
Push
[Call]
to transmit.
USING [TX CODE ENTER] KEY:
q
Push
[TX Code Enter]
to enter the TX code edit mode.
• The digit to be edited blinks.
w
Push
[TX Code Enter]
to select the desired digit to be
edited.
e
Push
[CH Up]
or
[CH Down]
to select the desired digit.
r
Push
[TX Code Enter]
to set. The digit to the right will
blink automatically.
t
Repeat
e
and
r
to edit all allowable digits.
y
After editing, push
[TX Code Enter]
to set.
• Return to the stand-by mode.
u
Push
[Call]
to transmit.
D
DTMF transmission
If the transceiver has
[DTMF Autodial]
assigned to it, the
automatic DTMF transmission function is available. Up to 8
DTMF channels are available.
q
Push
[DTMF Autodial]
— a DTMF channel appears.
w
Push
[CH Up]
or
[CH Down]
to select the desired DTMF
channel.
e
Push
[DTMF Autodial]
to transmit the DTMF code.