6
1
PANEL DESCRIPTION
TX CODE CHANNEL SELECT KEY
➥
Push to enter the TX code channel selection mode. Then
set the desired channel using
[CH Up]
/
[CH Down]
. (p. 9)
➥
While in the TX code channel selection mode, hold down
this key for 1 sec. to enter the TX code edit mode. Then
set the desired digit using
[CH Up]
/
[CH Down]
. (p. 10)
TX CODE CHANNEL UP/DOWN KEYS
Push to select a TX code channel directly.
ID-MR SELECT KEY
(PMR operation only)
➥
Recalls detected ID codes.
• Push this key, then select the ID code using
[CH Up]
/
[CH Down]
.
• Up to 5 ID’s are memorized.
➥
Hold down this key for 1 sec. to erase the selected ID’s.
ENCRYPTION KEY
➥
Push to turn the voice encryption function ON and OFF
while operating in the digital mode.
USER SET MODE KEY
➥
Hold down for 1 sec. to enter user set mode.
• During user set mode, push this key to select an item*, and
change the value or condition using
[CH Up]
/
[CH Down]
.
*Selectable items may differ depending on the pre-setting.
➥
Hold down this key for 1 sec. again to exit user set mode.
User set mode is also available via the ‘Power ON’ function.
In this case, all set mode items are available. Refer to p. 11
also.
Ext. CH Sel Mode KEY
Push to turn the Ext. CH Select function ON or OFF.
When the function is turned ON, memory channels can be
selected with external input operation only.
When the function is turned OFF, memory channels can be
selected with
[CH Up]
or
[CH Down]
operation, and cannot
with external input operation.
• This function is available when the external unit, such as a dimmer
control is connected to the transceiver with an optional cable, OPC-
1939 or OPC-2078 (p. 16).
• Ask your dealer for details of external input operation.