3
1
PANEL DESCRIPTION
u
SCRAMBLER INDICATOR
Appears when scrambler function is activated. (Optional UT-
109 (#02)/UT110 (#02) SCRAMBLER UNIT is required.)
i
2/5TONE INDICATOR
Appears when specified 2/5tone call is received.
o!0
LTR INDICATOR
Appears when LTR function is selected.
!1
SHORT MESSAGE INDICATOR
Appears when a short message is received.
!2
ALPHANUMERIC DISPLAY
Displays the CH number, 5-tone indication, DTMF numbers,
Audible indication, etc.
NOTE:
When the alphanumeric display blinks and trans-
mitting becomes impossible. In this case, check that the
antenna is not miss-matched or that DC battery voltage
has not dropped below 8 V
!3
ACTIVATED KEY INDICATOR
Appears or blinks when the key under this indicator is acti-
vated.
■
Programmable function keys
The following functions can be assigned to
[P0], [P1], [P2],
[P3], [P4], [
∫
∫
]
,
[
√
√
], [
]
and
[
]
programmable function
keys.
Consult your Icom Dealer or System operator for details con-
cerning your transceivers programming.
In the following explanations, programmable function names
are bracketed, the specific switch used to activate the func-
tion depends on programming.
CH UP AND DOWN KEYS
• Select an operating channel.
• Select a transmit code channel after pushing
the [
TX CH
] key.
• Select a DTMF channel after pushing the
[
DTMF
] key.
• Select a scan group after pushing and holding
the [
SCAN
] key.
OPERATING CHANNEL KEYS
Select an operating channel directly.
PRIORITY CHANNEL KEYS
Select priority A or priority B channel with each
push.
[CH UP]
[CH DN]
[CH1]
[CH2]
[CH3]
[CH4]
[PRI A]
00 IC-F610EUR.qxd 01.11.28 11:37 AM Page f (1,1)
