![background image](http://html2.mh-extra.com/html/icom/ic-f610/ic-f610_instruction-manual_3737442012.webp)
8
2
OPERATION
■
Receiving and transmitting
RECEIVING:
q
Push
[
K
I
]
to turn the power ON.
w
Push [
CH UP
] or [
CH DN
] to select a channel.
e
When receiving a call, adjust the audio output level to a
comfortable listening level.
TRANSMITTING:
r
Take the microphone off hook.
• 5-tone mute may be released (the ‘audible’ condition is selected
and “
” appears).
• A priority channel may be selected automatically.
t
Wait for the channel to become clear.
• The channel is busy when “
” appears.
y
Push the [
CALL
] key when initiating a call from your side.
• Coded audio may be heard from the transceiver, then “
”
appears.
• This operation may not be necessary depending on your signal-
ing system. Ask your System Operator or Dealer.
u
While pushing and holding [
PTT
], speak into the micro-
phone at your normal voice level.
i
Release [
PTT
] to receive.
IMPORTANT:
To maximize the readability of your signal: (1)
pause briefly after pushing [
PTT
], (2) hold the transceiver 15
to 20 cm from your mouth, then speak into the microphone at
a normal voice level.
D
Transmitting notes
• Transmit inhibit function
The transceiver has several lockout/inhibit functions which
restrict transmission under the following conditions:
• The channel is in mute condition (‘Inaudible’ condition; “
”
does not appear).
• Channel is busy.
• No matched (or matched) CTCSS is received.
• The selected channel is a ‘receive only’ channel.
• Time-out timer
After continuous transmission for a pre-programmed period,
the time-out timer is activated causing the transceiver to stop
transmitting and automatically select receive.
• Penalty timer
Once the time-out timer is activated, transmission is further
inhibited for a period determined by the penalty timer.
00 IC-F610EUR.qxd 01.11.28 11:37 AM Page k (1,1)