ii
peratures below –30°C or above +60°C or, in areas subject
to direct sunlight, such as the dashboard.
AVOID
operate the transceiver without running the vehi-
cle’s engine. The vehicle’s battery will quickly run out if the
transceiver is in transmission while the vehicle’s engine OFF.
AVOID
placing the transceiver in excessively dusty envi-
ronments.
AVOID
placing the transceiver against walls. This will
obstruct heat dissipation.
AVOID
the use of chemical agents such as benzine or
alcohol when cleaning, as they damage the transceiver sur-
faces.
BE CAREFUL!
The transceiver will become hot when
operating continuously for long periods.
For U.S.A. only
CAUTION:
Changes or modifications to this transceiver, not ex-
pressly approved by Icom Inc., could void your authority to operate
this transceiver under FCC regulations.
TABLE OF CONTENTS
IMPORTANT .................................................................................... i
EXPLICIT DEFINITIONS ................................................................. i
CAUTIONS ....................................................................................... i
TABLE OF CONTENTS .................................................................. ii
1
PANEL DESCRIPTION ........................................................ 1–6
■
Front panel ............................................................................ 1
■
Function display .................................................................... 2
■
Programmable function keys ................................................ 3
2
OPERATION ...................................................................... 7–10
■
Turning power ON ................................................................ 7
■
Channel selection ................................................................. 7
■
Receiving and transmitting ................................................... 8
D
Transmitting notes .......................................................... 8
D
Tx code channel selection .............................................. 9
D
Tx code number selection .............................................. 9
D
DTMF transmission ........................................................ 9
3
OPTIONAL SmarTrunk II™ OPERATION ....................... 11–12
■
SmarTrunk II™ and conventional modes ............................ 11
■
SmarTrunk II™ operation .................................................... 11
4
CONNECTION AND MAINTENANCE ............................. 13–19
■
Rear panel and connection ................................................. 13
■
Sullpied Accessories ........................................................... 14
■
Mounting the transceiver ..................................................... 15
D
Inverting the Front panel .............................................. 15
D
Mounting the Transceiver ............................................. 16
■
Optional UT-96/UT-105 installation ..................................... 17
■
Optional UT-109/UT-110 installation ................................... 17
■
Optional OPC-617 installation ............................................. 18
■
Antenna ............................................................................... 18
■
Fuse replacement ............................................................... 18
■
Cleaning ............................................................................. 18
5
OPTIONS ............................................................................... 19
DOC..........................................................................................20
00 IC-F610EUR.qxd 01.11.28 11:37 AM Page c (1,1)
