![background image](http://html1.mh-extra.com/html/icom/ic-f61/ic-f61_instruction-manual_4284149018.webp)
13
3
CONVENTIONAL OPERATION
■
Call procedure
When your system employs tone signalling (excluding CTCSS and
DTCS), the call procedure may be necessary prior to voice trans-
mission. The tone signalling employed may be a selective calling
system which allows you to call specific station(s) only and prevent
unwanted stations from contacting you.
q
Select the desired TX code channel or 5-tone code according to
your System Operator’s instructions.
• This may not be necessary depending on programming.
• Refer to pgs. 15, 16 for selection.
w
Push the call switch (assigned to one of the dealer programma-
ble switches:
[P0], [P1], [P2], [P3], [Red], [
]
and
[
]
).
e
After transmitting a 5-tone code, the remainder of your commu-
nication can be carried out in the normal fashion.
Selective calling
Non-selective calling
IC-F51_F61 BIIS-3.qxd 06.3.24 1:45 PM Page 13 (1,1)