![background image](http://html1.mh-extra.com/html/icom/ic-f61/ic-f61_instruction-manual_4284149015.webp)
10
2
PANEL DESCRIPTION
2
EMERGENCY KEYS
➥
Push and hold to transmit an emergency call.
➥
When [Emergency Single (Silent)] or [Emergency Repeat
(Silent)] is pushed, an emergency call is transmitted without a
beep emission and LCD indication change.
• If you want to cancel the emergency call, push (or push and hold)
the key again before transmitting the call.
• The emergency call is transmitted one time only or repeatedly until
receiving a control code depending on the pre-setting.
TX CODE ENTER KEY
Push to enter the direct ID code edit mode, for both 5-tone and
MSK. Then set the desired digit using [CH Up]/[CH Down]/
[TX Code CH Up]/[TX Code CH Down]. (p. 16)
TX CODE CHANNEL SELECT KEY
➥
Push to enter the direct ID code channel selection mode. Then
set the desired channel using [CH Up]/[CH Down]/[TX Code CH
Up]/[TX Code CH Down]. (p. 15)
➥
While in ID code channel selection mode, push for 1 sec. to enter
the ID code edit mode. Then set the desired digit using [CH
Up]/[CH Down]/[TX Code CH Up]/[TX Code CH Down]. (p. 16)
TX CODE CHANNEL UP/DOWN KEYS
Push to select a TX code channel directly.
ID MEMORY READ KEY
➥
Recalls detected ID codes.
• Push this key, then push [CH Up]/[CH Down] for selection.
• Up to 5 ID’s are memorized.
➥
Push and hold to erase the selected memorized ID’s.
IC-F51_F61 BIIS-3.qxd 06.3.24 1:45 PM Page 10 (1,1)