![background image](http://html1.mh-extra.com/html/icom/ic-f6022/ic-f6022_instruction-manual_4280615009.webp)
5
1
PANEL DESCRIPTION
1.
WIDE/NARROW KEY
Push to toggle the IF bandwdth between wde and narrow.
• The wde passband wdth can be selected from 25.0 or 20.0 kHz
usng the CS-F3020/F5020
cloning
software
. (PMR operaton
only) Ask your dealer for detals.
DTMF AUTODIAL KEY
➥
Push to enter the DTMF channel selecton mode. And
then select the desred DTMF channel usng [CH Up]/
[CH Down].
➥
After selectng the DTMF channel, push agan to transmt
the selected DTMF code.
RE-DIAL KEY
Push to transmt the last-transmtted DTMF code.
• TX memores are cleared after turnng the transcever OFF.
CALL KEYS
Push to transmt a 2/5-tone ID code.
• Call transmsson s necessary before callng another staton
dependng on your sgnallng system.
• [Call A] and/or [Call B] may be avalable when your system
employs selectve ‘Indvdual/Group’ calls. Ask your dealer whch
call s assgned to each key.
EMERGENCY KEY
Push and hold ths for specfied perod to transmt an emer-
gency call.
• The emergency call transmts wth beeps; the dsplay does not
change.
• The transcever can transmt an emergency call wth no beep ems-
son and LCD ndcaton change dependng on the pre-settng. Ask
your dealer for detals.
• If you want to cancel the emergency call, push and hold the key
agan before transmttng the call.
• The emergency call s transmtted one tme only or repeatedly untl
recevng a control code, dependng on the pre-settng.
SURVEILLANCE KEY
Push to turn the survellance functon ON or OFF.
When ths functon s turned ON, the beep s not emtted and
the LCD backlght does not lght when a sgnal s receved or
a key s pushed, etc.
SIREN
Push to emt a sren.
TX CODE ENTER KEY
(PMR operaton only)
Push to enter the TX code edt mode drectly.
Then set the desred dgt usng [CH Up]/[CH Down]. (p. 10)