– 2 –
Attaching accessories (Continued)
D
Belt clip
To attach:
1. Remove the battery pack from the transceiver, if
it is attached.
2. Slide the belt clip in the direction of the arrow until
the belt clip is locked and makes a ‘click’ sound.
BE CAREFUL!
DO NOT
breakyourfingernail.
To detach:
Lift the tab up (
q
), and slide the belt clip in the
direction of the arrow (
w
).
Belt clip
q
w
D
Connector cover
CAUTION: BE SURE
to attach the connector cover
when an optional device is not in use. Otherwise the
terminals of the multi-connector may be shorted by
a metal object, or become rusty by water intrusion.
This could damage the transceiver.
To attach:
1. Attach the connector cover over the multi-
connector. (
q
)
2. Tighten the screw. (
w
)
To detach:
1. Remove the screw. (
z
)
2. Detach the connector cover, and then connect an
optional device. (
x
)
q
w
x
z
