![background image](http://html1.mh-extra.com/html/icom/ic-f5020-series/ic-f5020-series_instruction-manual_4280468011.webp)
7
2
BASIC OPERATION
1
2
■
Turning ON the transceiver
q
Push
[ ]
to turn ON the transceiver.
w
If the transceiver is programmed for a start up password,
input the digit codes as directed by your dealer.
• The keys as below can be used for password input:
The transceiver detects numbers in the same block as identical.
Therefore “01234” and “56789” are the same.
e
When the “PASSWORD” indication does not clear after
inputting 4 digits, the input code number may be incorrect.
Turn OFF the transceiver and start over in this case.
■
Channel selection
Several types of channel can be selected. Methods may
differ according to your system set up.
NON-ZONE TYPE:
Push [CH Up] or [CH Down] to select the desired operating
channel, in sequence; or, push one of [MR-CH 1] to [MR-CH 4]
keys to select a channel directly.
ZONE TYPE:
Push [Zone], then push [CH Up] or [CH Down] to select the
desired zone.
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning
ON the transceiver, the transceiver automatically starts
scanning. Scanning stops when receiving a call.
KEY
NUMBER
0
5
4
9
3
8
2
7
1
6