![background image](http://html1.mh-extra.com/html/icom/ic-f5020-series/ic-f5020-series_instruction-manual_4280468014.webp)
10
2
BASIC OPERATION
D
TX code number edit
(PMR operation only)
If the transceiver has [TX Code CH Select] or [TX Code
Enter] assigned to it, TX code contents can be edited within
the allowable digits.
USING [TX CODE CH SELECT] KEY:
q
Push [TX Code CH Select] to enter the TX code channel
selection mode.
• Select the desired operating channel before entering the TX
code channel selection mode if necessary.
w
Push [TX Code CH Select] for 1 second to enter the TX
code edit mode.
• The digit to be edited blinks.
e
Push [TX Code CH Select] to select the desired digit to
be edited.
r
Push [CH Up] or [CH Down] to select the desired digit.
t
Push [TX Code CH Select] to set. The digit to the right will
blink automatically.
y
Repeat
r
and
t
to edit all allowable digits.
u
After editing, push [TX Code CH Select] to set.
• Return to the stand-by mode.
i
Push [Call] to transmit.
USING [TX CODE ENTER] KEY:
q
Push [TX Code Enter] to enter the TX code edit mode.
• The digit to be edited blinks.
w
Push [TX Code Enter] to select the desired digit to be
edited.
e
Push [CH Up] or [CH Down] to select the desired digit.
r
Push [TX Code Enter] to set. The digit to the right will
blink automatically.
t
Repeat
e
and
r
to edit all allowable digits.
y
After editing, push [TX Code Enter] to set.
• Return to the stand-by mode.
u
Push [Call] to transmit.
D
DTMF transmission
If the transceiver has [DTMF Autodial] assigned to it, the
automatic DTMF transmission function can be used. Up to 8
DTMF channels can be selected.
q
Push [DTMF Autodial]— a DTMF channel is displayed.
w
Push [CH Up] or [CH Down] to select the desired DTMF
channel.
e
Push [DTMF Autodial] to transmit the DTMF code.