■
Tone scan
The transceiver can detect the tone frequency or DTCS code
in a received signal. By monitoring a signal that is being trans-
mitted on the channel, you can determine the tone or code
required to open the receiving station’s squelch.
q
Push [
Y
] or [
Z
] to select the desired channel.
w
Push [
f
(CODE)] for 2 sec. to start tone scan.
e
When a matched tone or code is detected, the tone scan
stops automatically.
• The detected tone or code is automatically memorised into the
channel.
r
Push [
f
(CODE)] to cancel the tone scan, if necessary.
15
6
TONE SQUELCH/DTCS
T SQL
Flashes while scanning.
Selected channel number
