![background image](http://html1.mh-extra.com/html/icom/ic-f44gs/ic-f44gs_instruction-manual_4249598035.webp)
31
6
OPTIONAL UNIT INSTALLATION
■
UT-109 and UT-110 installation
The following PC board modification is required when
installing the optional UT-109 or UT-110:
q
Rotate
[VOL]
to turn the power OFF, and remove the bat-
tery pack. (p. 2)
w
Remove the unit cover as shown on p. 30 (Optional unit
installation).
e
Cut the pattern on the PCB at the TX mic circuit (MIC) and
RX AF circuit (DISC) as shown below.
r
Install the scrambler unit as described in the Optional unit
installation (p. 30).
t
Replace the unit cover and the battery pack, then rotate
[VOL]
to turn the power ON.
NOTE: When uninstalling the scrambler unit
Be sure to re-solder the disconnected points at left, other-
wise no TX modulation or AF output is available.
IC-F34_44GT_GS-1.qxd 04.9.24 10:26 AM Page 31 (1,1)