TTX-F3160/F5060-V1.0
8
4 Receiving a call
When the radio receives an incoming call from another radio in the same Talkgroup, the LED lights green
and audio is heard from speaker. Depending on preprogrammed settings, the LCD backlight is turned
ON, beeps are heard from the speaker along with the incoming call, and the Caller ID or corresponding
name is displayed.
Action of the TX/RX LED
1. The radio stays on the [Home repeater] in the standby mode.
2. Receives incoming calls sent from a radio belonging to the same Talkgroup. You can hear audio.
3. After the signal disappears, the TX/RX LED turns OFF.
Note: The difference between “receiving a call” and a “busy” status
Related settings;
■
Set Mode - Backlight (CS-F3160/F5060)
Default: Dim Auto
Selectable option:
OFF:
The backlight is always OFF.
OFF Auto: Lights for 5 seconds when any key except when
[PTT] is pushed, or when you have an incoming
call.
Dim Auto: Lights dim if you select this option on a mobile
radio and apply a signal to an external DIM
terminal. The backlight turns ON when no signal
is applied to an external DIM terminal. Valid for
only a mobile radio. If you select this option on
a handheld, it works the same as “ON”.
Dim:
Lights only dimly. Valid for only a mobile radio.
If you select this value on a handheld, it works
same as “ON”.
ON:
Lights continuously.
Selecting “OFF Auto” turns ON the LCD backlight for 5 seconds when receiving an incoming call.
Select the backlight setting from above table.
Receiving a call
The repeater is busy
3)
The LCD backlight is
lit (ON).
1)
The LED lights green.
2)
No audio is heard.
3)
The LCD backlight
remains unlit (OFF).
1)
The LED lights green.
2)
Audio is heard.
Summary of Contents for IC-F3160 SERIES
Page 13: ......
Page 14: ...1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan 2012 Icom Inc...
