background image

TTX-F3160/F5060-V1.0 

 

Foreword

 

 
The subscriber radio for the NXDN

TM

 IDAS

TM

 multisite trunked system works slightly different than the radio 

for  a  conventional  system.    For  example,  it  sometimes  transmits  a  signal  even  if  you  do  not  press  [PTT].   
Or  sometimes  it  does  not  transmit  even  if  you  press  [PTT]  for  a  long  time.    However  this  is  the  correct 
operation of a trunked system subscriber radio and not an error or irregular action. 
 
This document explains how an IDAS

TM

 multisite trunked radio operates, by showing visible examples of the 

radio’s behavior, like the LED indicators or the LCD backlight.    It is possible to get a basic knowledge of how 
an IDAS

TM

 multisite trunked radio works, by studying the LED blinking and/or the LCD backlight status. 

 
This knowledge is very basic and simple, but necessary, important, and useful, especially for troubleshooting 
and  to  judge  whether  the  system  or  subscriber  settings  are  appropriate or  not.    Or  if  there  are  any  other 
issues you have to solve other than the IDAS

TM

 equipment, to maintain good service to your customer. 

 

Disclaimer 

 
The information in this document has been carefully checked, and is believed to be correct and accurate.   
However, Icom assumes no responsibility for inaccuracies or mistakes. Furthermore, Icom reserves the right 
to  make  changes  to  any  of  the  products  described  in  this  document  without  notice  or  obligation.    The 
systems and applications described herein are for information and reference purposes only. 
 
IPR and Copyrights 
The Icom products described in this quick guide may include Icom Intellectual Property Rights (IPR) and/or 
copyrighted  Icom  computer  programs  stored  in  radio  memories  or  other  media/devices.  Such  IPR  and 
copyrighted computer programs are protected by laws in Japan, the United States and other countries. Any 
Icom  IPR  and/or  copyrighted  Icom  computer  programs  contained  in  the  Icom  products  described  in  this 
quick  guide  may  not  be  copied,  reproduced,  modified,  reverse-engineered,  or  distributed  in  any  way. 
Furthermore, the purchase of Icom products shall not be deemed to grant any license either directly or by 
implication, except for the normal non-exclusive license to use the product that is specified by law in the sale 
of a product. 
 
Document Copyrights 
No duplication or distribution of this document or any portion thereof shall take place without the expressed 
written consent of Icom. Reproduction, distribution, or transmission for any purpose in any form or by any 
means, electronic or mechanical, shall only be allowed with the expressed written consent of Icom. 
 
Trademarks 
Icom,  Icom  Inc.  and  the  Icom  logo  are  registered  trademarks  of  Icom  Incorporated  (Japan)  in  the  United 
States, the United Kingdom, Germany, France, Spain, Russia, Japan and/or other countries. IDAS and IDAS 
logo are trademarks of Icom Incorporated. 
 
NXDN is a trademark of Icom Incorporated and JVC KENWOOD Corporation. 
 
All other products or brands are registered trademarks or trademarks of their respective holders. 
 
 

 

Summary of Contents for IC-F3160 SERIES















Reviews: