ii
TABLE OF CONTENTS
IMPORTANT ........................................................................ i
EXPLICIT DEFINITIONS ..................................................... i
CAUTIONS .......................................................................... i
TABLE OF CONTENTS ...................................................... ii
1
PANEL DESCRIPTION ............................................. 1–5
■
Front panel ............................................................................ 1
■
Function LED ........................................................................ 2
■
Programmable function keys ................................................ 3
2
OPERATION ............................................................. 6–8
■
Turning power ON ................................................................ 6
■
Channel selection ................................................................. 6
■
Receiving and transmitting ................................................... 7
D
Transmitting notes .......................................................... 7
D
DTMF transmission ........................................................ 8
D
Scrambler function ......................................................... 8
■
User set mode ...................................................................... 8
D
Entering user set mode .................................................. 8
3
CONNECTION AND MAINTENANCE .................... 9–12
■
Rear panel and connection ................................................... 9
■
Supplied accessories .......................................................... 10
■
Mounting the transceiver...................................................... 11
■
Optional UT-96/UT-105/UT-109/UT110 installation ............. 11
■
Optional OPC-617 installation ............................................. 12
■
Antenna ............................................................................... 12
■
Fuse replacement ............................................................... 12
■
Cleaning ............................................................................. 12
4
OPTIONAL SmarTrunk II™ OPERATION ........... 13–15
■
SmarTrunk II™ and conventional modes ........................... 13
■
SmarTrunk II™ operation ................................................... 13
5
OPTIONS .................................................................... 16
DO NOT
use or place the transceiver in areas with tem-
peratures below –30°C or above +60°C or, in areas subject
to direct sunlight, such as the dashboard.
AVOID
operating the transceiver without running the vehi-
cle’s engine. The vehicle’s battery will quickly run out if the
transceiver is in transmission while the vehicle’s engine is
OFF.
AVOID
placing the transceiver in excessively dusty envi-
ronments.
AVOID
placing the transceiver against walls. This will ob-
struct heat dissipation.
AVOID
the use of chemical agents such as benzine or al-
cohol when cleaning, as they damage the transceiver sur-
faces.
BE CAREFUL!
The transceiver will become hot when
operating continuously for long periods.
For U.S.A. only
CAUTION: Changes or modifications to this transceiver, not ex-
pressly approved by Icom Inc., could void your authority to operate
this transceiver under FCC regulations.
