![background image](http://html2.mh-extra.com/html/icom/ic-f3061t/ic-f3061t_adjustment_3497215001.webp)
Adjustment for IC-F3061T/S,IC-F3161T/S,IC-F3161DT/DS
Adjustment
No.
Value
REF No.
CK.POINT
Volaged meter input impedance: 50 k ohm and above
PREPARATION
Connect to the PC(IBM compatible)through
the cloning cabe(OPC-966), boot up the
adjustment software.
(CS-F3060 ADJ,CS-F3160/F5060 ADJ)
LOCK VOLTAGE
Set the value as below on the adjustment screen.
ADJUSTMENT
(ADJ screen)
LV (RX1)
164 [3.2]
LV (RX1)
LV (RX2)
153 [3.0]
LV (RX2)
LV (TX)
153 [3.0]
LV (TX)
Push F5 key to update for current value,
and verify them.
ADJUSTMENT
LVIN
(ADJ screen)
(ADJ screen)
154.9MHz RX
RX LVA1
3.2
RX LVA1
LVIN
174MHz RX
RX LVA2
3.0
RX LVA2
174MHz TX
TX LVA
3.0
TX LVA
LOCK VOLTAGE
Verify the Lock Voltage as below.
VERIFY
LVIN
136MHz RX
0.6 - 1.6
(ADJ screen)
155MHz RX
0.6 - 1.6
LVIN
136MHz TX
0.6 - 1.6
FREQUENCY
Set the TX frequency to the upper edge of
ADJUSTMENT
the band, and set the frequency as below.
(ADJ screen)
Frequency
REF
ANT connector
TX POWER
Set the voltage of the HV line as below in
ADJUSTMENT
transmitting.
[USA],[GEN]ver.=7.5V [EUR] ver.=7.2V
Adjust the TX power as below.
ADJUSTMENT FREQUENCY
155MHz
(ADJ screen)
Hi Power
5.0 W
Power(Hi)
ANT connector
L2 Power
2.0 W
Power(L2)
L1 Power
1.0 W
Power(L1)
Adjustment Condition & Tuning
(adjustment frequency)±250Hz
PAGE1