![background image](http://html2.mh-extra.com/html/icom/ic-f3030-series/ic-f3030-series_insrtuction-manual_4227152014.webp)
9
3
BASIC OPERATION
Channel selection
■
Several types of channel selections are available. Methods
may differ according to your system set up.
NON-ZONE TYPE:
Push [CH Up] or [CH Down] to select the desired operating
channel, in sequence; or, push one of [MR-CH 1] to [MR-CH 4]
keys to select a channel directly.
ZONE TYPE:
Push [Zone], then push [CH Up] or [CH Down] to select the
desired zone.
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turn-
ing power ON, the transceiver automatically starts scanning.
Scanning stops when receiving a call.
Call procedure
■
When your system employs tone signaling (excluding CTCSS
and DTCS), the call procedure may be necessary prior to voice
transmission. The tone signaling employed may be a selective
calling system which allows you to call specific station(s) only
and prevent unwanted stations from contacting you.
q
Select the desired TX code channel or 2-tone code ac-
cording to your System Operator’s instructions.
• This may not be necessary depending on programming.
• Refer to page 13 for selection.
w
Push the call key (assigned to one of the dealer program-
mable keys: [Emer], [Side1], [Side2], [Side3], [P0], [P1],
[P2] and [P3]) or [PTT].
After transmitting a 2-tone code, the remainder of your
e
communication can be carried out in the normal fashion.
Selective calling
Non-selective calling
Summary of Contents for IC-F3030 Series
Page 35: ...MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16...
Page 36: ...MEMO...
Page 37: ...MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16...
Page 38: ...MEMO...