background image

29

9

SAFETY TRAINING INFORMATION

Votre radio Icom produit une énergie électromagnétique 

de radiofréquences (RF), en mode de transmission. 
Cette radio est conçue pour un «usage professionnel 
seulement» et classée comme tel, ce qui signifie qu’elle 
doit être utilisée uniquement dans le cadre d'un travail 

par des personnes conscientes des dangers et des mesures visant à mi-
nimiser ces dangers. Elle N’EST PAS conçue pour une «utilisation grand 
public», dans un environnement non contrôlé.

Cet appareil a été évalué et jugé conforme, aux limites d’exposition aux 
RF de la FCC, pour une «utilisation grand public». En outre, votre radio 
Icom satisfait les normes et directives qui suivent en matière de niveaux 
d'énergie et d’énergie électromagnétique de RF et d’évaluation de tels 
niveaux en ce qui concerne l’exposition humaine:
  •  Supplément  C,  édition  97-01,  du  Bulletin  OET  n°  65  de  la  FCC, 

«Evaluating Compliance with FCC Guidelines for Human Exposure 
to Radio Frequency Electromagnetic Fields».

  •  Norme  de  l’American  National  Standards  Institute  (ANSI):  IEEE 

C95.1-1992 sur les niveaux de sécurité compatibles avec l’exposition 
humaine aux champs électromagnétiques de radiofréquences (3 kHz 
à 300 GHz).

  •  Norme de l’ANSI: IEEE C95.3-1992 sur la méthode d’évaluation re-

commandée du champ magnétique potentiellement dangereux des 
radiofréquences et des micro-ondes.

  •  Les accessoires illustrés à la p. 23-24 sont approuvés pour une utili-

sation avec ce produit. L’utilisation d’accessoires autres que ceux pré-
cisés peut entraîner des niveaux d’exposition aux RF supérieures aux 
limites établies par la FCC en matière d’exposition aux RF sans fil.

Afin de vous assurer que votre exposition à 
une énergie électromagnétique de RF se situe 
dans les limites permises par la FCC pour une 
utilisation grand public, veuillez en tout temps 
respecter les directives suivantes:

 

•  

NE PAS

 faire fonctionner la radio sans qu’une antenne appropriée y soit 

fixée, car ceci risque d’endommager la radio et causer une exposition 
supérieure aux limites établies par la FCC. L’antenne appropriée est celle 
qui est fournie avec cette radio par le fabricant ou une antenne spéciale-
ment autorisée par le fabricant pour être utilisée avec cette radio.

 

 

 

NE PAS

 émettre pendant plus de 50 % du temps total d’utilisation de 

l’appareil («50 % du facteur d'utilisation»). La notion «50% du facteur 
d’utilisation» s’applique également au mode VOX/PTT. Émettre pen-
dant plus de 50 % du temps total d’utilisation peut causer une expo-
sition aux RF supérieure aux limites établies par la FCC. Lorsque le 
voyant DEL rouge s’allume, cette radio est en train d’émettre. La radio 
émettra si vous appuyez sur le bouton du microphone.

 

•  

TOUJOURS

 

tenir

 l’antenne éloignée d’au moins 2,5 cm de votre corps 

au moment d’émettre et utiliser uniquement l’attache pour ceinture Icom 
illustrée à la p. 23, lorsque vous attachez la radio à votre ceinture, ou 
à autre chose, de façon à vous assurer de ne pas provoquer une ex-
position aux RF supérieure aux limites fixées par la FCC. Pour offrir à 
vos interlocuteurs la meilleure qualité de transmission possible, tenez 
l’antenne à au moins 5 cm de votre bouche et légèrement de côté.

Les renseignements ci-dessus fournissent à l’utilisateur toute l’information 
nécessaire sur l’exposition aux RF et sur ce qu’il faut faire pour assurer que 
cette radio fonctionne en respectant les limites d’exposition aux RF établies 
par la FCC.

Interférence électromagnétique et compatibilité

En mode de transmission, votre radio Icom produit de l’énergie de RF qui 
peut provoquer des interférences avec d’autres appareils ou systèmes. Pour 
éviter de telles interférences, mettez la radio hors tension dans les secteurs 
où une signalisation l’exige. 

NE PAS

 faire fonctionner l’émetteur dans des 

secteurs sensibles au rayonnement électromagnétique tels que les hôpi-
taux, les aéronefs et les sites de dynamitage.

Usage professionnel/contrôlé

Ce radio émetteur est utilisé dans des cas où des personnes sont exposées 
en raison de leur travail, pourvu qu’elles soient conscientes du risque d’ex-
position et qu’elles puissent exercer un contrôle sur cette exposition.

Summary of Contents for IC-F3030 Series









































Reviews: