4
Section
2
PROGRAMMABLE KEY FUNCTIONS
If you use the CS-F29SR2
programming
software
(purchase separately), you can assign the functions
described below to [TOP], [Upper], and [Lower].
ZONE
z
Push to select a desired Zone.
z
Hold down for 1 second to announce the current
Zone number.
L
The Zone number is announced when selecting a
Zone, regardless of the Channel Announce setting.
SCAN START/STOP
Push to start and stop a scan.
L
When a scan is started with the Power ON Scan or
Automatic Scan function, push this key to pause it. The
paused scan resumes after a preset period of time.
PRIORITY A CHANNEL, PRIORITY B CHANNEL
Push to select the Priority A or Priority B channel.
PRIORITY A CHANNEL (REWRITE),
PRIORITY B CHANNEL (REWRITE)
z
Push to select the Priority A or Priority B channel.
z
Hold down for 1 second to set the operating
channel as the Priority A or Priority B channel.
MEMORY CHANNEL 1, MEMORY CHANNEL 2
MEMORY CHANNEL 3, MEMORY CHANNEL 4
Push to select Memory channel 1, 2, 3, or 4.
MONI
z
Push to turn the CTCSS (DTCS) mute ON or OFF.
z
While holding down this key, the transceiver opens
any squelch, or releases any mute.
LOCK
Hold down for 1 second to turn the Key Lock function
ON or OFF.
L
Even if the function is ON, [MONI] and [SURVEILLANCE]
are not locked.
SURVEILLANCE
z
Hold down for 1 second to turn ON the Surveillance
function.
z
Push to turn OFF the function.
L
When the function is ON and a signal is received, a
beep does not sound and the status indicator does not
light, even if you push any key.
SIREN
Hold down for 2 seconds to emit a siren sound.
L
The siren continues to sound until turning OFF the
transceiver.
L
This function is for situations other than an emergency
alert, such as a security alarm.
SCRAMBLER
z
Hold down for 1 second to turn ON the Voice
Scrambler function.
z
Push to turn OFF the function.
COMPANDER
z
Hold down for 1 second to turn ON the Compander
function.
z
Push to turn OFF the function.
L
The Compander function reduces noise components
from the transmitted audio to provide clear
communication.
S-RING/C-RING
z
Push to make a Smart-Ring call.
z
Hold down for 1 second to make a Call-Ring call.
ANNOUNCE
Push to turn the Channel Announce function ON or OFF.
L
The transceiver announces the position of
[Rotary Selector].
L
When the Beep function is OFF, the operating channel is
not announced, regardless of this setting. (p. 6)
ZONE/ANNOUNCE
z
Push to select a desired Zone.
z
Hold down for 1 second to turn the Channel
Announce function ON or OFF.
L
The Zone number is announced when selecting a
Zone, regardless of the Channel Announce setting.
[TOP]
[Lower]
[Upper]
Programmable key functions
NOTE:
Refer to the instruction manual that comes
with the transceiver for the default settings of these
keys.
