![background image](http://html1.mh-extra.com/html/icom/ic-f29dr2/ic-f29dr2_operating-instructions-manual_4224074018.webp)
5
dPMR™ OPERATION
17
Break-in function
You can send a Break-in request call.
The Break-in request call announces to the other
stations on the channel that the user wants to break
into the current communication in the group.
The transceiver waits for the current communication to
end, and then sends the call.
D
Receiving
1. When receiving a Break-in request call, the ringer
sounds, and the LED indicator blinks orange.
2. Push any key to stop the ringer sounding and the
LED blinking.
D
Transmitting
While receiving an audio signal, hold down [Break]*
for 1 second to send a Break-in request call.
Example:
Station A, B, and C are communicating
using the same Common ID.
NOTE:
• The transceiver waits for the communication to end,
and then sends the call.
• To cancel the Break-in request call, push [Break]*
while waiting.
Station A
Station B
Station C
Station A
Station B
Station C
Push
[Break]
After Station A releases [PTT] (transmission is finished.)
Break! Break!
Wait
Station C pushes [Break] to
transmit the break-in request
call while Station A is
transmitting.
Station A and B receive the
break-in request signal.
* Assign the function to a programmable key by using
the CS-F29DR2
programming
software
(purchase
separately).
Ask your dealer for details.
Previous view