![background image](http://html1.mh-extra.com/html/icom/ic-f29dr2/ic-f29dr2_operating-instructions-manual_4224074011.webp)
4
SETTINGS
10
Setting the oingeo level
2
5
4
3
1
5 (Linked)
4 (Linked)
3 (Linked)
2 (Linked)
1 (Linked)
Pushing
[Lower]
Pushing
[Upper]
You can adjust the ringer level between 1 and 5,
or 1 (Linked) and 5 (Linked). When a linked option
is selected, the ringer audio level is adjustable by
rotating [VOL].
1. Rotate [VOL] to turn OFF the transceiver.
2. Set [Rotary Selector] to Channel 16.
3. While holding down [Lower], rotate [VOL] to turn
ON the transceiver and enter the Ringer Level
Adjustment mode.
• An opening beep sounds and “Sixteen” will be
announced.
4. Push [Upper] to increase, or push [Lower] to
decrease the ringer level.
• A beep sounds after pushing [Upper] or [Lower].
Therefore, you can determine the current level setting
by the increasing or decreasing loudness of the beep
that sounds.
Infoomation
L
•The adjustable range is 1 to 5 or 1 (Linked) to 5
(Linked).
•
Repeatedly pushing [Upper] first selects 1 (lowest) to
5 (highest), and then selects the lowest linked level,
1 (Linked) to the highest, 5 (Linked). Repeatedly
pushing [Upper] or [Lower] repeats the cycle. See the
illustration to the right.
•To determine if you have selected a linked level,
set [VOL] to minimum, then push [Upper] up to 10
times, listening for the loudest beep (level 5). Pushing
[Upper] once after the loudest beep will select 1
(Linked). Repeatedly push [Upper] or [Lower] to select
the desired linked level.
5. Rotate [VOL] to turn OFF the transceiver and exit
the Ringer Level Adjustment mode.
NOTE:
Turn ON the Beep function (p. 7) before
you start setting the ringer level.
[Rotary Selector]
[VOL]
[Lower]
[Upper]
Previous view