![background image](http://html.mh-extra.com/html/icom/ic-f1100d-series/ic-f1100d-series_user-manual_3049851011.webp)
OPTIONS
D
BATTERY PACKS
•
BP-278/BP-279/BP-280
BATTERY PACKS
For IC-F1100D series, Output Power 5 W/
IC-F2100D series, Output Power 4 W:
Battery
pack Voltage
Capacity
Approximate
battery life*
BP-278
7.2 V 1130 mAh (minimum)
1190 mAh (typical)
9 hours
BP-279
7.2 V 1485 mAh (minimum)
1570 mAh (typical)
11.5 hours
BP-280
7.2 V 2280 mAh (minimum)
2400 mhA (typical)
18 hours
For IC-F2100D series, Output Power 5 W:
Battery
pack Voltage
Capacity
Approximate
battery life*
BP-278
7.2 V 1130 mAh (minimum)
1190 mAh (typical)
8.5 hours
BP-279
7.2 V 1485 mAh (minimum)
1570 mAh (typical)
11 hours
BP-280
7.2 V 2280 mAh (minimum)
2400 mhA (typical)
17 hours
* When the power save function is turned ON, and the
operating periods are calculated under the following
conditions.
TX : RX : standby = 5 : 5 : 90
D
CHARGERS
•
BC-213
DESKTOP CHARGER
To rapidly charge a single battery pack. A power adapter
may be supplied, depending on the charger version.
•
BC-214
MULTI CHARGER
+ BC-157S
AC ADAPTER
To rapidly charge up to 6 battery packs.
D
DC CABLES
•
CP-23L
CIGARETTE LIGHTER CABLE
Use when charging the battery pack from a 12 V
cigarette lighter socket. (Use with the BC-213)
•
OPC-656
DC POWER SOCKET
Use with a 13.8 V power source instead of the power
adapter. (Use with the BC-214)
D
Function display
(For only the Simple key and Ten-key types)
1 2 3 4 5 6 7
8
9
10
11
1
SIGNAL STRENGTH INDICATOR
Displays the relative receive signal strength level.
2
LOW POWER ICON
Displayed when low output power is selected.
3
AUDIBLE ICON
• Displayed when the channel is in the ‘Audible’
(unmuted) mode.
• Displayed when a matched 2-Tone or 5-Tone is
received.
• For the dPMR models: Displayed when a Call Setup
is received (Digital mode).
4
GPS ICON
Displayed when the GPS signal is received, depending
on the presetting.
5
ENCRYPTION / SCRAMBLER ICON
For the NXDN models: Displayed when the Encryption
function is ON.
For the dPMR models: Displayed when the Scrambler
function is ON.
6
BELL ICON
Displayed or blinks when a matching signal is received,
depending on the presetting.
7
SCAN ICON
Displayed or blinks while scanning.
8
KEY LOCK ICON
Displayed when the Key Lock function is ON.
9
BATTERY INDICATOR
• Displays the remaining battery charge.
• Blinks when the battery charge decreases to a set
level.
Indication
Battery
Status
Full
Mid
Charging
required
Battery
exhausted
10
ALPHANUMERIC READOUT
Displays messages such as channel text.
11
SHIFT INDICATOR
Displayed when [Shift] is pushed.
BASIC OPERATION
D
Turning ON the transceiver
NOTE:
Before using the transceiver for the first time, the
battery pack must be fully charged for optimum life and
operation. See the BATTERY CHARGING section.
z
Rotate [VOL] to turn ON the transceiver.
D
Receiving and Transmitting
Receiving:
1. Select a channel.
L
Rotate [Rotary Selector] or push [CH Up] or
[CH Down], depending on the presetting.
2. When receiving a call, rotate [VOL] to adjust the audio
output level to a comfortable listening level.
NOTE:
Depending on the presetting, the transceiver may
automatically transmit the microphone audio for the preset
time period when a matching signal is received. (Auto TX
function)
Transmitting:
CAUTION:
Attach an antenna before transmitting.
Transmitting without an antenna may damage the
transceiver.
1. Wait until the channel is clear to avoid interference.
2. While holding down [PTT], speak at your normal voice
level.
3. Release [PTT] to receive.
IMPORTANT:
To maximize the readability of your signal:
1. After pushing [PTT], pause briefly before you start
speaking.
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from
your mouth, then speak at your normal voice level.
D
Key Lock function
You can use the Key Lock function to prevent accidental
channel changes and unnecessary function access,
depending on the presetting.
All assignable keys except the following are electronically
locked: [Monitor], [Call], [Call A], [Call B], [Emergency],
[Light], [Lock], [Lone Worker], [Siren], [Surveillance],
[Sp. Func 1], [Sp. Func 2], [Shift], [Clear]*, and [PTT].
* : For only the dPMR models.
You can also make or receive calls, or turn the transceiver
ON or OFF, during the Key Lock function is ON.
z
Hold down [Lock] for 1 second to turn the Key Lock
function ON or OFF.
For only the Simple-key and Ten-key types:
•
“
” is displayed when the Key Lock function is ON.
•
“
” disappears when the Key Lock function is OFF.
BATTERY CHARGING
NOTE:
Before detaching or attaching a battery pack,
BE SURE to turn OFF the transceiver by rotating [VOL]
fully counter clockwise, until it makes a “click” sound.
Otherwise, a transceiver malfunction could occur.
D
Rapid charging with the BC-213
You can rapidly charge the Li-ion battery pack with the
BC-213.
Charging time:
Approximately 3.5 hours for the BP-280
Additionally needed item (purchase separately):
• A power adapter (may be supplied with the charger,
depending on the charger version).
D
Rapid charging with the BC-214
You can rapidly and simultaneously charge up to 6 battery
packs with the optional BC-214 (the AD-130 CHARGER
ADAPTERS are installed.)
Charging time:
Approximately 3.5 hours for the BP-280
Additionally needed item (purchase separately):
• The BC-157S AC ADAPTER or the OPC-656 DC POWER
CABLE
CAUTION: DO NOT
reverse the polarity when connecting
the OPC-656 to a power source. This will ruin the battery
charger.
Red:
+
, Black:
_
Battery
pack
Battery pack
+ Transceiver
Power adapter*
The CP-23L (for a 12 V cigarette lighter socket) can be
used instead of the power adapter.
* A different type, or no power adapter is supplied,
depending on the charger version.
NOTE:
If the charging indicator alternately blinks green
and orange, remove the battery pack or the transceiver
from the charger, then reinsert it.
*1: Charger adapter’s shape may differ, depending on the
charger version.
*2: A different type, or no power adapter is supplied,
depending on the charger version.
Battery pack
+ Transceiver
Turn OFF
Battery
pack
BC-214
Power
adapter*
2
To an
AC outlet
OPC-656
Connect to a DC power supply:
12 to 16 V, at least 7 A
Red:
+
, Black:
_
D
ANTENNAS
•
FA-SC25V/FA-SC28V/FA-SC29V/FA-SC55V
VHF
ANTENNAS
FA-SC25V: 136–150 MHz
FA-SC28V: 148–162 MHz
FA-SC29V: 160–174 MHz
FA-SC55V: 150–174 MHz
•
FA-SC26VS/FA-SC27VS/FA-SC56VS/FA-SC57VS
VHF STUBBY ANTENNAS
FA-SC26VS: 136–144 MHz
FA-SC27VS: 142–150 MHz
FA-SC56VS: 150–162 MHz
FA-SC57VS: 160–174 MHz
•
FA-SC61VC
VHF CUT ANTENNA
FA-SC61VC: 136–174 MHz
•
FA-SC25U/FA-SC57U/FA-SC72U/FA-SC73US
UHF
ANTENNAS
FA-SC25U: 400–430 MHz
FA-SC57U: 430–470 MHz
FA-SC72U: 470–520 MHz
FA-SC73US: 450–490 MHz
•
FA-SC26US
UHF STUBBY ANTENNAS
FA-SC26US: 400–450 MHz
•
FA-SC01U/FA-SC02U
UHF ANTENNAS
FA-SC01U: 350–400 MHz
FA-SC02U: 330–380 MHz
•
FA-SC61UC
UHF CUT ANTENNAS
FA-SC61UC: 380–520 MHz
D
OTHERS
•
MB-130
CHARGER BRACKET
Mounts the BC-213 desktop charger on a variety of
places in a vehicle.
•
MB-133
BELT CLIP
•
HM-158LA/HM-159LA/HM-168LWP/HM-171GPW
SPEAKER MICROPHONE
Combination speaker-microphone that provides
convenient operation while the transceiver is hanging on
your belt.
The HM-171GPW includes high-performance GPS
receiver.
L
Adjust the microphone gain before use.
•
HM-153LA/HM-166LA
EARPHONE MICROPHONE
Ideal for hands-free operation. Clip the HM-153LA or
HM-166LA (with integrated PTT switch) to your lapel or
breast pocket.
L
Adjust the microphone gain before use.
•
HS-94/HS-95/HS-97
HEADSET
+ VS-4LA
PTT SWITCH CABLE
/OPC-2004LA
ADAPTER CABLE
HS-94: Ear-hook type
HS-95: Neck-arm type
HS-97: Throat microphone
VS-4LA: To connect to headsets
OPC-2004LA: To connect to headsets for VOX operation
L
Adjust the both microphone and VOX gain before use.
•
HS-94LWP/HS-95LWP
HEADSET
HS-94LWP: Ear-hook type
HS-95LWP: Neck-arm type
L
Adjust the both microphone and VOX gain before use.
Some options may not be available in some countries.
Ask your dealer for details.
PANEL DESCRIPTION
D
Status indicator
Lights red:
Transmitting.
Lights green:
Receiving or squelch is open.
Lights or blinks orange: A matching signal is received,
depending on the presetting.
Slowly blinks green:
The battery should be charged.
Blinks green fast:
The battery must be charged.
D
Speaker microphone jack
CAUTION: DO NOT
use the transceiver without the jack
cover or the optional equipment attached.
The transceiver meets IP67 requirements for dust-tight
and waterproof protection only when the jack cover or
the optional HM-168LWP, HM-171GPW, HS-94LWP, or
HS-95LWP is attached.
Status
indicator
Function
Display*
2
Microphone
Speaker
microphone
jack
Speaker
[P0],[P1],
[P2],[P3]*
1, 2
Ten
-
key*
1, 3
[PTT]
[Up]*
1,2
[Upper]*
1,4
[Down]*
1,2
[Lower]*
1,4
[Emer]*
1
[VOL]
Antenna
connector
[Rotary Selector]*
1
There are 3 types of transceivers in the IC-F1100D and
IC-F2100D series.
•
IC-F1100D / IC-F2100D:
Non-display type
•
IC-F1100DS / IC-F2100DS:
Simple key
type
•
IC-F1100DT / IC-F2100DT:
Ten
-
key type
The illustration below shows the Ten-key type transceiver.
*1: Dealer assignable.
*2: Only for the Simple key and Ten-key types.
*3: Only for the Ten-key type.
*4: Only for the Non-Display type.
BC-213
Charger adapter*
1
Turn OFF
Charging indicator
Lights orange: Charging
Lights green: Charged
NOTE:
The BC-214 has a charging timer that stops
charging after approximately 5.3 hours of charging.
FREQUENCY RANGE AND OUTPUT POWER
Model
Version Frequency
Range
Output
Power
VHF Digital Transceiver
IC-F1100D series
–
136–174 MHz
5 W
UHF Digital Transceiver
IC-F2100D series
USA-02 450–512 MHz
4 W
EXP-04
AUS-01 450–520 MHz
EXP-02
EXP-03 350–400 MHz
Other 400–470 MHz 4 W or
5 W
• Channel spacing:
6.25 kHz
*
1
/12.5 kHz/25 kHz
*
2
*
1
Only Digital mode,
*
2
Except USA versions
D
AquaQuake
TM
Water Draining function
If the [AquaQuake] is assigned to a key, the AquaQuake
Water Draining function clears water from the speaker grill
to maintain clear audio by vibrating the speaker cone.
1. Hold down [AquaQuake] to turn ON the AquaQuake
water draining function.
• A low frequency vibration is generating to remove
water from the speaker grill.
•
Water in the speaker grill may muffle the sound
coming from the speaker.
2. Release the key to turn OFF the function.
NOTE:
•
After the specified period of time expires, this function
automatically stops, even if a user continues to hold
down this key.
•This key works for only the internal speaker.