Icom IC-F110, Instruction Manual

Page: 12 / 24

9
2
OPERATION
D
TX code channel selection
If the transceiver has a [TX CH] key, the display can be tog-
gled between the operating channel number (or name) and
TX code channel number (or name). When the TX code
channel number (or name) is displayed, the
[ ] / [ ] keys
select the TX code channel.
To select a TX channel:
q
Push [TX CH] —a TX code channel appears.
w
Push [ ] / [ ] to select the desired TX code channel.
e
Push [CALL] to transmit the selected TX code.
r
Push [TX CH] again to return to the channel display.
D
TX code number selection
If the transceiver has a [TX CH] key, TX code contents can be
changed within the allowable digits.
To select a TX code:
q
Push [TX CH] —a TX code number appears and the first
digit blinks.
w
Push [ ] / [ ] to select the desired number of the blink-
ing digit.
e
Push [TX CH] to enter the selected number and the next
digit will start blinking automatically.
r
Repeat step
w
and
e
to input all allowed digits.
t
Push [CALL] to transmit the selected TX code.
D
DTMF transmission
If the transceiver has a [DTMF] key, the automatic DTMF
transmission function is available. Up to 7 DTMF channels
may be available.
To transmit a DTMF code:
q
Push [DTMF] —a DTMF code channel appears.
w
Push [ ] / [ ] to select the desired DTMF channel.
e
Push and hold [DTMF] to transmit the DTMF code on the
selected DTMF channel.
D
Scrambler function
The UT-109 (#02) or UT-110 (#02) optional voice scrambler
unit provides high performance private communication
between stations with the same scrambler codes.
To turn the scrambler function ON and OFF:
q
Push and hold [SCRM] to turn the scrambler function ON.
w
Push [SCRM] to turn the function OFF.
IC-F110_F210_EUR-1.qxd 03.2.5 3:31 PM Page 9 (1,1)