17
5
SCAN OPERATION
“TAG” channel setting
■
Memory channels can be specified to be skipped for the
memory channel scans respectively. The “TAG” channel
function is only available during the scan operation.
q
Push [MR•
MW
] to select the memory mode.
w
Select the desired memory channel to be a “TAG” chan-
nel.
• Push
, then push [0•
BANK
], and rotate [DIAL] to select the
BANK number, if desired. Push [CLR•
DEL
] to exit the BANK se-
lection mode.
e
Push
, then push [9•
TAG
] to set a “TAG.”
• “TAG” appears.
• Non-“TAG” channels are skipped during scan.
r
To cancel the “TAG” setting, repeat the above steps.
Memory channel 15 is
scanned during memory
scan.
Memory channel 15 is
skipped during scan.
Push
then
Appears the “TAG” indicator.
5