![background image](http://html.mh-extra.com/html/icom/ic-a24/ic-a24_instruction-manual_612411031.webp)
26
7
BATTERY PACKS
D
Regular charging
q
Attach the battery pack to the transceiver.
w
Be sure to turn the transceiver power OFF.
e
Connect the Wall charger or optional cable (CP-20) as
shown below.
r
Charging the battery pack approx. 8 hours, depending on
the remaining power condition.
DO NOT
charge BP-210N more than 12 hours. Otherwise,
BP-210N will be damaged. BP-210N must be charged for
8–12 hours only.
■
Optional battery case
When using a battery case attached to the transceiver, install
6
×
AA (LR6) size Alkaline batteries as illustrated below.
q
Remove the battery case from the transceiver.
w
Install 6
×
AA (LR6) size Alkaline batteries.
• Be sure to observe the correct polarity.
CAUTION:
• When installing batteries, make sure they are all the same
brand, type and capacity. Also, do not mix new and old
batteries together.
• Keep battery contacts clean. It’s a good idea to clean bat-
tery terminals once a week.
Wall charger
To [DC 11V]
IC-A24/A6 with the
attached battery pack
CP-20 (for 11 24 V)
(optional)
To the cigarette
lighter socket
Turn power OFF
7
R
CAUTION !
•
DO NOT
modify the CP-20. A modifica-
tion could cause a fire or electrocution.
•
BE CAREFUL
not to cut or fray the
CP-20’s power cable when disconnect-
ing/connecting the CP-20 from/to the
cigarette lighter socket.
IC-A24_A6-5.qxd 2007.04.23 4:32 PM Page 27