![background image](http://html.mh-extra.com/html/icom/ic-a24/ic-a24_instruction-manual_612411022.webp)
17
5
SCAN OPERATION
■
Weather channel scan
(U.S.A. version only)
q
Push
, then push [ENT•
WX
] to select a weather chan-
nel.
w
Set squelch to the point where noise is just muted.
e
Push
, then push [ANL•
SCAN
] to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, rotate [DIAL].
r
To stop the scan, push [CLR•
DEL
].
■
“TAG” channel setting
Memory and weather channels* can be specified to be
skipped for the memory and weather channel* scans respec-
tively. The “TAG” channel function is only available during
scan operation.
q
Push [MR•
MW
] to select memory mode; or, push
, then
push [ENT•
WX
] to select a weather channel.*
w
Select the desired memory channel to be a “TAG” chan-
nel.
• Push
, then push [0•
BANK
], and rotate [DIAL] to select the
BANK number if desired. Push [CLR•
DEL
] to exit the BANK se-
lection mode.
e
Push
, then push [9•
TAG
] to set a “TAG.”
• “TAG” appears.
• Non-“TAG” channels are skipped during scan.
r
To cancel the “TAG” setting, repeat above steps.
*Weather channel: U.S.A. version only.
Memory channel 15 is
scanned during memory
scan.
Memory channel 15 is
skipped during scan.
Push
then
Appears the “TAG” indicator.
IC-A24_A6-5.qxd 2007.04.23 4:32 PM Page 18