Icom IC-A220 Instruction Manual Download Page 29

Page: 29 / 40

MENU MODE

Configuration menu

■

items

Auto squelch

“AUTO SQL”

Sets the Auto squelch function.

• OFF:

The Auto squelch is OFF.

• ON:

The Auto squelch is ON.

• USER SET: Set the auto squelch in the Squelch mode “SQL MODE”

item in the Settings menu. (p.20)

Squelch mode switch setting

“SQL SW”

Sets the length of time that the squelch mode readout (p. 3)
blinks when you switch the squelch mode. (p. 6)

* Displayed only when the Auto squelch “AUTO SQL” item in the Con-

figuration menu is set to “USER SET.”

• 002 to 010: Sets the length of time that the squelch mode readout

blinks to between 2 seconds and 10 seconds.

Intercom 1 squelch level

“MIC1 SQL”

Sets Intercom 1’s squelch level.
The setting level is required to open the squelch when speak-
ing into Intercom 1.

• OFF (0):

Turns off Intercom 1’s squelch.

• 001 to 030: Sets Intercom 1’s squelch level to between 1 and 30.

Intercom 2 squelch level

“MIC2 SQL”

Set Intercom 2’s squelch level.
The setting level is required to open the squelch when speak-
ing into Intercom 2.

• OFF (0):

Turns off Intercom 2’s squelch.

• 001 to 030: Sets Intercom 2’s squelch level to between 1 and 30.

Dualwatch interval

“DW INTERVAL”

Sets the interval time while operating Dualwatch or weather
scan.

• FAST:

Sets the interval to 300 milliseconds.

• MID:

Sets the interval to 600 milliseconds.

• SLOW:

Sets the interval to two seconds.

Priority watch

“PRI.WATCH”

Sets the priority watch is enabled or not.

• ON:

The priority watch is ON.

• OFF: The priority watch is OFF.

Priority watch interval

“PW INTERVAL”

Sets the active frequency receive interval time while receiving
the standby frequency.

• FAST: Sets the interval to 400 milliseconds.
• MID:

Sets the interval to 800 milliseconds.

• SLOW: Sets the interval to two seconds.

Memory protection

“MEM PROTECT”

Sets the memory protection to regular memory channels and
group memory channels.
Editing the regular memory and group memory channels is
inhibited while the protection is ON.

• OFF: The memory protection is OFF.
• ON:

The memory protection is ON.

Summary of Contents for IC-A220









































Search results

Summary of Contents for IC-A220

Reviews:

Related manuals for IC-A220

Brands by name

Popular brands

Icom IC-A220, Instruction Manual

Search results

Summary of Contents for IC-A220

Reviews:

Related manuals for IC-A220

Brands by name

Popular brands