Icom IC-A220, Instruction Manual

Page: 18 / 40

11
3
MEMORY OPERATION
D Selecting channel tag names
(For only group memory channels)
The tag name can be set to a three character name, in ad-
dition to the group number. It is convenient for separating
memory types.
q
Push [RCL] to enter the memory mode, and then rotate
[O-DIAL]
to select group memory channel.
Push
w
[DIAL] and then rotate [O-DIAL] to select a memory
group from GRP01 to GRP05.
• Push [DIAL] again to set the memory group.
Push
e
[MEM] and then rotate [O-DIAL] to select “CH
TAG.”
Push
r
[MEM] and then rotate [DIAL] to select the desired
channel tag.
• The tag name shown to the right is selectable.
Push
t
[MEM]
to set the channel tag.
Hold down
y
[RCL] to exit the memory mode.
CH01
127.00
5
122.00
GRP01
TWR
Channel tag list
TAG
NAME
DISPLAY
MEANS
Group*
1
GPS*
2
_ _ _ YES – Non-tag
TWR YES YES Tower
GND YES YES Ground
ATS YES YES ATIS
ATF YES YES Air traffic
APP YES YES Approach
ARR YES YES Arrival
AWS YES YES Automatic Weather Station
CLR YES YES Clearance / Delivery
CTF YES YES Common Traffic Advisory Frequency
DEP YES YES Departure
FSS YES YES Flight Service Station
RFS YES YES Remote Flight Service Station
UNI YES YES Unicom frequency
MF YES YES Mandatory frequency
OTH YES – Other
U-1 YES – User1 setting (p. 24)
U-2 YES – User2 setting (p. 24)
*
1
Group memory, *
2
GPS memory
About U-1/U-2
You can edit U-1 and U-2 to the desired tag name in the Con-
figuration menu. Refer to page 24 for the details.