![background image](http://html.mh-extra.com/html/icom/ic-a14ic-a14s/ic-a14ic-a14s_instruction-manual_612386010.webp)
5
1
PANEL DESCRIPTION
n
Function display
q
FUNCTION INDICATOR
Appears when [FUNC] is pushed.
w
MEMORY INDICATOR (p. 12)
Appears when memory channel mode is selected.
e
TAG INDICATOR (p. 20)
Appears when the selected memory channel is set as a
TAG channel.
r
RX INDICATOR (p. 10)
Appears when receiving a signal or when the squelch
opens.
t
TX INDICATOR (p. 10)
Appears while transmitting.
y
DUPLEX INDICATOR (IC-A14 only) (p. 24)
Appears when the duplex function is activate.
Blinks while setting the duplex frequency.
u
ANL INDICATOR (p. 22)
Appears when the ANL (Automatic Noise Limiter) func-
tion is in use.
i
WEATHER ALERT INDICATOR (IC-A14 only) (p. 23)
Appears when the weather alert function is in use.
o
LOCK INDICATOR (p. 9)
Appears when the lock function is in use.
!0
LOW BATTERY INDICATOR (p. 11)
Appears when the battery is nearing exhaustion. The
attached battery pack requires recharging when this
attached battery pack requires recharging when this
indicator ON.
Blinks when battery recharging is necessary.
!1
FREQUENCY READOUT
Shows the operating frequency, memory channel num-
ber, memory name, set mode item, etc., depending on
the selected condition.
q
w
e
r
t
y
u
i o
!1
!0
CONFIDENTIAL!Draft
Appears when memory channel mode is selected.
Appears when memory channel mode is selected.
ppears when the selected memory channel is set as a
ppears when the selected memory channel is set as a
(p. 10)
(p. 10)
ppears when receiving a signal or when the squelch
ppears when receiving a signal or when the squelch
TX INDICATOR
TX INDICATOR
Appears while transmitting.
Appears while transmitting.
WEATHER ALERT INDICATOR
WEATHER ALERT INDICATOR
Appears when the weather alert function is in use.
Appears when the weather alert function is in use.
o
o
LOCK INDICATOR
LOCK INDICATOR
Appears when the lock function is in use.
Appears when the lock function is in use.
!0
!0
only!
Appears when the duplex function is activate.
Appears when the duplex function is activate.
Blinks while setting the duplex frequency.
Blinks while setting the duplex frequency.
ppears when the ANL (Automatic Noise Limiter) func-
ppears when the ANL (Automatic Noise Limiter) func-