![background image](http://html2.mh-extra.com/html/icom/ic-a110/ic-a110_instruction-manual_3524455009.webp)
6
3
SCAN OPERATION
■
Scan operation
q
Push [V/M] to select memory mode or VFO mode, if nec-
essary.
• “
” appears on the memory mode.
w
Make sure the squelch level is set to the threshold point.
• Set a squelch level (01 to 25) where the noise is muted.
e
Push [SCAN] to start scan.
• To change the scan direction, turn [DIAL].
• “SCAN (or P SCAN)“ flashes while scaning.
r
Push [SCAN] again to stop the scan.
NOTE:
Normal scan or Priority scan is pre-programmed
by cloning. Please ask your dealer or system operator for
details.
ï
NORMAL SCAN
•
Memory lock scan
Repeatedly scans memory
channels except skip (lockout)
channels.
•
VFO scan
Repeatedly scans all
frequencies over the entire
band.
Scan step is minimum channel
spacing. (eg 25 kHz or
8.33
*
kHz)
*Except USA version
ï
PRIORITY SCAN
•
Priority memory scan
While scaning on a memory
mode, priority watch checks
for a signal on the selected
priority channel every 250 m
sec except lockout channel.
MR
Mch 2*
Mch 1
Mch 3
Mch 20
250 msec.
*: Lockout ch
SKIP
Scan
Jump
Start
highest
frequency
lowest
frequency
Priority
ch
Mch 2*
Mch 1
Mch 3
Mch 20
250 msec.
250 msec.
SKIP
*: Lockout ch