background image

4

2

BASIC OPERATION

Power ON

q

Push [POWER] to turn power ON.

w

Operate the transceiver as indicated in the following sec-
tions.

e

Select the desired memory channel (or VFO frequency)
with the [V/M] keys.

• When receiving a signal, 

appears and audio is emit-

ted from the speaker.

• Further adjustment of audio level may be necessary at this point.
• Push [SQL] to adjust the squelch level. (p. 6)
• Push and hold the tuning dial for 1 sec. to select the [TS], each

push increments/decrements to the frequency are either 10 kHz
or 1 MHz. (p. 7)

r

Push and hold [PTT] to transmit, then speak into the mi-
crophone.

• Transmit indicator 

lights.

t

Release [PTT] to receive.

Channel selection

ï

VFO/Memory selection

q

Push [V/M] to select memory
mode or VFO mode.

Rotate the dial to select a de-
sired frequency/channel.

w

During memory mode opera-
tion, push [V/M] key to trans-
fer the memory contents to
VFO.

• 

Push [V/M] to select VFO
mode.

NOTE: 

Only frequency data is transferred even if the

memory channel has a memory name.

ï

External speaker output control

External speaker output can be turned OFF, if desired.

q

Push and hold [SQL] for 1 sec.

w

Rotate the dial to select “SP OFF”.

e

Push [SQL] to turn to the previous mode.

NOTE:

This function avail-

able external speaker only.

Summary of Contents for IC-A110

























Reviews: