![background image](http://html.mh-extra.com/html/icom/ic-80ad/ic-80ad_service-manual_612360025.webp)
5 - 10
5-11 RECEIVE SENSITIVITY ADJUSTMENTS
1) Select an adjustment item (band) using
[2]
/
[8]
.
2) Set the SSG as specifi ed (frequency, deviation and output level).
3) Push the
[BAND]
to adjust (automatic) and store the adjustment value.
ADJUSTMENT
ADJUSTMENT
ITEM
OPERATION
VALUE
RECEIVE
SENSITIVITY
NOTE:
“
RECEIVE SENSITIVITY
” must be adjusted before “
S-METER
.” Otherwise, “
S-METER
” will
not be adjusted properly.
[Tr]
1
1) Set the power supply voltage to 7.4 V.
2) Connect an SSG to the antenna connector and set as;
Modulation
: 1 kHz
Deviation
: 3.5 kHz
Push
[BAND].
(Automatic
adjustment)
[30.1 MHz*]
2
• Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[49.9 MHz*]
3
• Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[50.1 MHz*]
4
• Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[75.9 MHz*]
5
• Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[76.1 MHz*]
6
• Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[90.2 MHz*]
7
• Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[117.9 MHz*]
8
• Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[118.1 MHz*]
9
• Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: –3 dBµ (–110 dBm)
†
[146.1 MHz*]
10 • Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: –3 dBµ (–110 dBm)
†
[173.9 MHz*]
11 • Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: –3 dBµ (–110 dBm)
†
[174.1 MHz*]
12 • Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[222.1 MHz*]
13 • Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[259.9 MHz*]
14 • Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[260.2 MHz*]
15 • Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[305.2 MHz*]
16 • Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[349.9 MHz*]
17 • Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: 0 dBµ (–107 dBm)
†
[350.1 MHz*]
18 • Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: –3 dBµ (–110 dBm)
†
[440.1 MHz*]
19 • Set the SSG as;
Frequency
: (Displayed on the function display)
Level
: –3 dBµ (–110 dBm)
†
†
; This output level of a standard signal generator (SSG) is indicated as SSG’s open circuit.
*; This frequency is an example only, and may differ from the actual frequency displayed on the function display.