8
SET MODE
8-8
Network (Continued)
Primary DNS Server
(Default:
—
)
If there are two DNS server addresses, enter the
primary DNS server address.
2nd DNS Server
(Default:
—
)
If there are two DNS server addresses, enter the
secondary DNS server address.
Network Name
(Default:
—
)
lf you are operating the IC-7610 using the optional
RS-BA1, enter a network name of up to 15 characters.
Network Control
(Default:
OFF
)
lf you are operating the IC-7610 using the optional
RS-BA1, select “ON.”
Power OFF Setting (for Remote Control)
(Default:
Shutdown only
)
Selects whether to shutdown or to enter the remote
standby mode after the transceiver is turned OFF.
Control Port (UDP)
(Default:
50001
)
lf you are operating the IC-7610 using the optional
RS-BA1 software, set a port number for the control
signal between the IC-7610 and the remote station.
Serial Port (UDP)
(Default:
50002
)
lf you are operating the IC-7610 using the optional
RS-BA1 software, set a port number for the serial data
between the IC-7610 and the remote station.
Audio Port (UDP)
(Default:
50003
)
lf you are operating the IC-7610 using the optional
RS-BA1 software, set a port number for the audio
signal
between the IC-7610 and the remote station.
Internet Access Line
(Default:
FTTH
)
lf you are operating the IC-7610 using the optional
RS-BA1 software, set the port number for the audio
signal between the IC-7610 and the remote station.
MENU
» SET > Network >
Network User1
MENU
» SET > Network >
Network User2
Network User1 ID
(Default:
—
)
Network User2 ID
(Default:
—
)
lf you are operating the IC-7610 using the optional
RS-BA1, enter a user name of up to 16 characters.
Network User1 Password
(Default:
—
)
Network User2 Password
(Default:
—
)
Enter a password for each user.
Display
MENU
» SET >
Display
LCD Backlight
(Default: 50%)
Sets the LCD backlight brightness.
LED Bright
(Default: 50%)
Sets the LED brightness.
Display Type
(Default: A)
Sets the display type to A or B.
Display Font
(Default: Basic)
Selects the font for the frequency readout.
Meter Response (Standard, Edgewise)
(Default: Mid)
Sets the meter needle response speed to Slow, Mid or
Fast.
Meter Type (Normal Screen)
(Default: Standard)
Sets the S/RF meter type for the normal display to
Standard, Edgewise or Bar.
Meter Type (Expand Screen)
(Default: Bar)
Sets the S/RF meter type for the expanded display to
Standard, Edgewise or Bar.
Meter Peak Hold (Bar)
(Default: ON)
Turns the Meter Peak Hold function ON or OFF.
Memory Name
(Default: ON)
Turns the Memory name display in the Memory mode
ON or OFF.
APF-Width Popup (APF OFF→ON)
(Default: ON)
Turns the APF filter width display ON or OFF.
Network User1 ID Administrator
(Default:
NO
)
Network User1 ID Administrator
(Default:
NO
)
Sets the user as the administrator.
Only the authorized user can disconnect the
communication between the IC-7610 and the remote
station.
MENU
» SET >
Network
Network Radio Name
(Default:
IC-7610
)
If you are operating the IC-7610 using the optional
RS-BA1 software, enter a name of up to 15
characters.