![background image](http://html.mh-extra.com/html/icom/ic-756/ic-756_instruction-manual_612285019.webp)
16
2
INSTALLATION AND CONNECTIONS
■
Power supply connections
Use an optional PS-85
DC POWER SUPPLY
, etc. when
operating the transceiver with AC power. Refer to the
diagrams below.
CONNECTING AN ICOM DC POWER SUPPLY
to DC power socket
PS-85
AC outlet
AC cable
Transceiver
CONNECTING A NON-ICOM DC POWER SUPPLY
to DC power
socket
Non-Icom power supply
AC outlet
AC cable
20 A fuses
Supplied
DC power cable
13.8 V 20 A
Black
_
Red
+
Transceiver
CONNECTING A VEHICLE BATTERY
12 V
battery
Supplied
DC power cable
+
red
-
black
Crimp
Solder
Grommet
CAUTION:
Before connecting the DC power cable,
check the following important items. Make sure:
• The [POWER] switch is OFF.
• Output voltage of the power source is 12–15 V when you
use a non-Icom power supply.
• DC power cable polarity is correct.
Red
: positive
+
terminal
Black
: negative
_
terminal
NEVER connect
to a 24 V battery.
NOTE:
Use terminals for
the cable connections.