![background image](http://html2.mh-extra.com/html/icom/ic-7300/ic-7300_manual_4112674023.webp)
Your Transmitter
Using an Amplifier
23
•
Best to configure amplifier to start up in Standby mode
–
check out tune and SWR in
“barefoot” mode and adjust Tx power on your rig
•
Avoid using ALC, adjust Tx power (Drive) on your rig to maintain linear operation
•
Have a dummy load and use it to adjust your amplifier before going on the air
•
Learn to quickly fine tune on the air and
do it it off the operating frequency of others
•
In all cases, your station should be configured to
monitor output power and SWR at
all times while Transmitting
•
Key an eye on temperature meter if you are operating in digital modes for long
periods and/or at high duty cycles
Usually 30
–
50W Drive Will Create Full Output
–
AVOID OVERDRIVING!
Summary of Contents for IC-7300
