![background image](http://html2.mh-extra.com/html/icom/ic-7300/ic-7300_manual_4112674013.webp)
Its Mostly About The Receiver
Starting Point
for Receiver settings
13
Not to Scale
•
Set preamplifier/attenuator so that the noise floor is close to
“S0” on your signal meter
•
Set RF gain at Max. and AGC speed setting matched to mode:
•
Fast for CW mode
•
Medium for Digital modes
•
Slow for Voice modes (SSB, AM)
•
Roofing/DSP filter(s) matched to mode, no IF shift:
•
2.4 - 3.0 KHz for Voice or digital pass-band modes
•
500 Hz for RTTY
•
400 - 500 Hz for CW (wider when tuning a split pileup)
•
Set DSP Noise Reduction levels for
modest improvement
in
noise level
•
Leave Noise Blanker off unless you are dealing with a
strong
repetitive pulse noise source
Summary of Contents for IC-7300
