• Touch [TX/ID] on the main adjustment menu screen.
4-4
ADJUSTMENT ITEM
TRANSCEIVER'S CONDITION
OPERATION
ADJUST
POINT
VALUE
TX POWER &
POWER METER SETTING
(Preparation)
1 • Display: “TX POWER SET”
• Receive
1) Connect the AG with the millivoltmeter
to [MIC], and then set it as;
Frequency : 1.5 kHz
Level
: 30 mVrms
2) Connect the power meter to the
antenna connector.
3) Touch [Power] to enter to the TX
power adjustment mode.
–
–
(HF BAND)
2 • Display: "TX Total HF Gain"
• Transmit (automatic)
• Adjust the TX power by rotating
[MAIN DIAL], and then touch [SET].
[MAIN DIAL]
50 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
3 • Display: "POWER HF 1%"
• Transmit (automatic)
2 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
4 • Display: "POWER HF 10%"
• Transmit (automatic)
12.5 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
5 • Display: "POWER HF TUNE"
• Transmit (automatic)
6 • Display: "POWER HF 50%"
• Transmit (automatic)
52.5 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
7 • Display: "POWER HF 100%"
• Transmit (automatic)
105 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
AM CARRIER POWER
(HF BAND)
8 • Display: "POWER AM Ratio HF"
• Transmit (automatic)
1) Touch [SET].
(Automatically starts to transmit.)
2) Adjust the TX power by rotating
[MAIN DIAL], and then touch [SET].
25 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
9 • Display: "POWER 50M SET"
• Transmit (automatic)
–
–
Touch [SET].
TX POWER &
POWER METER SETTING
(50 MHz band)
10 • Display: "TX Total 50M Gain"
• Transmit (automatic)
• Adjust the TX power by rotating
[MAIN DIAL], and then touch [SET].
[MAIN DIAL]
50 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
11 • Display: "POWER 50M 1%"
• Transmit (automatic)
–
2 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
12 • Display: "POWER 50M 10%"
• Transmit (automatic)
12.5 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
13 • Display: "POWER 50M TUNE"
• Transmit (automatic)
14 • Display: "POWER 50M 50%"
• Transmit (automatic)
52.5 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
15 • Display: "POWER 50M 100%"
• Transmit (automatic)
105 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
AM CARRIER POWER RATIO
(50 MHz band)
16 • Display: "POWER AM Ratio 50M"
• Transmit (automatic)
1) Touch [SET].
(Automatically starts to transmit.)
2) Adjust the TX power by rotating
[MAIN DIAL], and then touch [SET].
25 W
(A beep sounds, and
then another beeps
sound 0.5 sec. later.)
17 • Display: "POWER 70M SET"
• Receive
–
–
Touch [SET].
4-4 TX POWER ADJUSTMENTS
(Continued on the next page.)
NOTE: The transceiver automatically transmits when a TX adjustment item is selected.
