![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_basic-manual_3602293081.webp)
5
D-STAR OPERATION <BASIC>
5-19
Directly inputting (UR)
D
The destination station call sign can be directly input.
Example:
Directly input the call sign “JM1ZLK.”
Push
q
DR
(
C
) to select the DR mode.
Check whether or not “TO” is selected.
w
• If “TO” is not selected, touch the “TO” field.
Touch the “TO” field.
e
• The “TO SELECT” screen appears.
Touch [
r
Z
] to display the next page.
Touch “Direct Input (UR).”
t
• The “DIRECT INPUT (UR)” screen appears.
Touch the desired block one or more times to
y
select
the desired character or symbol.
(Example: J)
• A to Z, 0 to 9 and / can be selected.
• Touch
“AB
⇔
12” to toggle between the Alphabet input
and Number input mode.
• Touch [CLR](
D
) to delete the selected character, symbol
or number.
• Touch “
” to input a space.
Touch [
u
f
](
D
) to move the cursor backwards, or
touch [
g
](
D
) to move the cursor forwards.
Repeat steps
i
y
and
u
to program a call sign of
up to 8 characters, including spaces, and then touch
[ENT](
D
).
(Example: First, J, then M, then 1, then Z, then L,
then K.)
• The transceiver returns to the DR mode screen, and “JM
-
1ZLK” is displayed in “TO.”
• After programming, you can correct the call sign in the
DIRECT INPUT (UR) screen.
• The programmed call sign remains on the DIRECT IN
-
PUT (UR) screen, until inputting a new call sign.
If the programmed call sign is duplicated in “Your Call
Sign” memory, the name is displayed. (Only when the
name has been programmed.)
Program a call
sign, and touch
[ENT].
“TO” (Destination) setting (Continued)
“JM1ZLK” is set in “TO.”
“TO” is selected.
Touch
“TO.”
Touch
[
Z
].
Touch
“ Direct Input
(UR)”
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay