![background image](http://html.mh-extra.com/html/icom/ic-410pro/ic-410pro_advanced-manual_612141023.webp)
7
SELCALL (Selective Calling)
7-2
Description
Besides the Tone Squelch function for silent standby,
you can use the Selcall (Selective Calling) function.
Selcall has 100,000 options when using 5 tone.
You can use the Selcall function to call another unit or
call a Group on the same channel, as well as station
code, text, the answer back function and auto scan
start. These, and many more, can be set using the
optional CS-410PRO
cloning
software
.
NOTE:
• Selcall cannot be used on CB channel 5, 35, and
Repeater channel 5.
• A Selcall transmission is restricted to a total of 3
seconds in a 1 minute period.
Calling
TX code is the Selcall code that you transmit. You can
enter maximum of 32 TX codes into the IC-410PRO,
using the optional CS-410PRO
cloning
software
.
D
Selecting a TX code
1) Select the desired CB channel or Repeater
channel, except for CB channel 5, 35, and
Repeater channel 5.
➥
Push [UP]/[DOWN].
2) Turn ON the Function mode.
➥
Push [FUNC].
• “ ” is displayed.
3) Enter the TX code selection mode.
➥
Push [SCAN].
TX code
• If entered using the CS-410PRO
cloning
software
,
the text is displayed instead of the code.
4) Select the desired TX code or text.
➥
Push [UP]/[DOWN].
5) Push [PTT] to transmit the selected TX code, or
push [SCAN] to set the selected TX code and exit
the TX code selection mode.
• When you transmit, a short beep sounds.
Information
You can assign TX code texts to all 32 TX codes using
the CS-410PRO
cloning
software
.