![background image](http://html.mh-extra.com/html/icom/ic-410pro/ic-410pro_advanced-manual_612141010.webp)
3
SET MODE
3-2
D
Set mode sequence
The table below describes the sequence of the items in the Set mode.
• The sequence is as shown below when you push [FUNC] in the Set mode.
Set mode items
• Squelch level
Starting item
• Own ID*
2
*
3
• Scan mode
• CTCSS/DTCS*
1
• Backlight
• Beep
• Beep Level
• RF Power
• Quiet mode
• Lockout
• Roger Beep
• Battery Voltage
• Auto Power Off
• Signal Monitor
• Horn
• RX VFO
• Scan Stop Timer
• Scan Restart
• Mic Gain
• Lone Worker
*
2
• AF Minimum Level
*
2
*
1
Selected CTCSS or DTCS code is displayed.
*
2
May not be displayed, depending on the transceiver’s setting.
*
3
5 digit Own ID is displayed.