Icom IC-2200H Instruction Manual Download Page 55

Page: 55 / 108

SCAN OPERATION

■

Scan resume condition

The scan resume condition can be selected as timer or pause
scan. The selected resume condition is also used for priority
watch. (p. 44)

Push

[SET

]

to enter set mode.

Push

[SET]

[MONI]

several times until “SCT” or “SCP”

appears as shown above.

• When “d” is displayed in place of the 100 MHz digit, cancel the

DTMF memory encoder in advance. (p. 46)

Rotate

[DIAL]

to set the desired timer:

• “SCT-15”

: Scan pauses 15 sec. while receiving a signal.

• “SCT-10”

: Scan pauses 10 sec. while receiving a signal.

• “SCT-5”

: Scan pauses 5 sec. while receiving a signal.

• “SCP-2”

: Scan pauses until the signal disappears and then

resumes 2 sec. later.

Push any keys than

[SET]

[MONI]

to exit set mode.

Push

[

SET

B(D-OFF)]

to enter set mode.

Push

[

SET

B(D-OFF)]

[

ENT

C(T-OFF)]

several

times until “SCT” or “SCP” appears as shown at
left.

Push

[

]

[

]

to select the scan resume condi-

tion.

• See item

at left for scan resume condition details.

Push

[

CLR

A(MW)]

to exit set mode.

NOTE:

Set mode cannot be accessed when memory names are
displayed. To set the scan resume condition, return to fre-
quency indication by pushing

[MONI

]

on the front

panel for 1 sec., or push

[FUNC]

then

[

MONI

1(ANM)]

(HM-

133V) to cancel the channel name indication, then set as
described on this page.

ANM

SET

USING

SET MODE

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

The display shows that
the scan will resume
15 sec. after it stops.

Summary of Contents for IC-2200H













































































































Search results

Summary of Contents for IC-2200H

Reviews:

Icom IC-2200H, Instruction Manual, Page: 55 / 108

Search results

Summary of Contents for IC-2200H

Reviews: